RCH Jumper Cables and Cooler Pipes for a Class 47-7 Loco - OO Gauge (SET 28)

Between 1979 and 1988 seventeen Class 47/4 locomotives were converted for Push-Pull use on the Scottish Region and renumbered in the 47/7 number range 47701 to 47717. This conversion work included fitting of RCH jumper cables to the cab fronts that were used to connect the remote electrical driving controls from the DBSO cab at the other end of the train.  These locomotives were also fitted with additional pipework on the bodyside for the improved compressor cooling system. 

This set of RCH Cables and Cooler Pipes is enough for one Class 47/7 Locomotive, the UNPAINTED pack includes:-

2 - Left Hand Side  RCH Jumper Cables
2 - Right Hand Side RCH Jumper Cables
1 - Compressor Cooler Pipework

The pack does NOT include the bufferbeam brake pipework or ETH cables shown in the pictures, these are available separately in SET 7 here:- Class 47 Pipes & Cables SET 7

Notes:-

• There were some variations between members of the Class 47/7 fleet in cable fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
• These RCH Jumper Cables may also be suitable for use on the later Class 47/7 locomotives which were fitted with TDM control equipment that used the same RCH jumper cables.
• The cables & pipes are supplied unpainted, please refer to pictures for typical colours.
• Top-Tip - use a light coat of white primer first, then paint the cables and pipes before removing them from the sprue.

(SET Number 28 for Class 47/7 RCH Jumper Cables)