Detailed Pipes, Cables and Steps for a Class 42 Warship Locomotive - OO Gauge (SET 37)

This set of brake pipes and multiple working connectors is enough for both ends of one Class 42 Warship Locomotive, the UNPAINTED pack includes:-

2 - Vacuum Hoses with hose dummy bracket (VAC)
4 - Regulating Control Air Pipes (CA) - White
2 - Steam Heat Pipes (S/H)
2 - Multiple-Working Jumper Cables (M/W) - Black
2 - Multiple-Working Jumper Receptacles (M/W) - Black

Also included in this set are 2 - Front Lower Steps, these are fitted under the buffer on the drivers-side only at each end.

Notes:-

• There were many variations between members of the Class 42 fleet in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
• All pipes have a 0.7mm peg that can be fitted into a drilled hole in the buffer beam, alternatively the peg can be cut-off and the pipe attached with a small amount of adhesive.
• These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
• The pipes are supplied unpainted, please refer to pictures for typical colours.
• Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.

(SET Number 37 for Class 42)