Detailed Brake Pipes for Class 59 or 66 Locomotives - OO Gauge (Pack for 2 Locos) - SET 35

This OO Gauge set of brake pipes is enough for both ends of two Class 59 or Class 66 Locomotives, the UNPAINTED pack includes:-

4 - Air Brake Pipes (BP) - Red
4 - Main Reservoir Air Pipes (MRP) - Yellow

Notes:-

• There are many variations between members of the Class 59 and 66 fleets in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
• Each locomotive has one air brake pipe and one main res pipe on each end fitted to the right of the drawhook as shown in the picture.
• All pipes have a 0.7mm peg that can be fitted into a drilled hole in the buffer beam, alternatively the peg can be cut-off and the pipe attached with a small amount of adhesive.
• These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
• The pipes are supplied unpainted, please refer to pictures for typical colours.
• Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.

(SET Number 35 for Class 59/66)

PLEASE NOTE: SUPPLIED PACK CONTENTS FITS TWO LOCOMOTIVES