Detailed Pipes and Cables for a Class 56 Locomotive - OO Gauge (SET 8)

This set of brake pipes is enough for both ends of one Class 56 Locomotive, the UNPAINTED pack includes:-

2 - Air Brake Pipes (BP) - Red
4 - Main Reservoir Air Pipes (MRP) - Yellow
4 - Regulating Control Air Pipes (CA) - White
2 - Multiple Working Jumper Cables (M/W) - Orange
2 - Multiple Working Jumper Receptacles (M/W) - Orange

Notes:-

• There may be variations between members of the Class 56 fleet in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
• All pipes & cables have a 0.7mm peg that can be fitted into a drilled hole in the buffer beam / cab front, alternatively the pegs can be cut-off and the parts attached with a small amount of adhesive.
• These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
• The pipes are supplied unpainted, please refer to pictures for typical colours.
• Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.
• The dummy screw coupling shown in the pictures is not included, these are available separately here.

(SET Number 8 for Class 56)