Detailed Pipes and Cables for a Class 73 Locomotive - OO Gauge (SET 25)

This set of brake pipes (high and low level), multiple working equipment cables and ETH cables is enough for both ends of one Class 73 Electro-Diesel Locomotive, the UNPAINTED pack includes:-

BP – Air Brake Pipes
MRP – Main Reservoir Pipes
CA – Control Air Pipes
VAC – Vacuum Brake Pipes (including feed pipe that runs to the left side of the buffer beam)
HI-L/R – High Level Brake Pipes (Left/Right)
HI-MW – High Level Multiple Working Cables
JA-MW – High Level Multiple Working Cables (JA-Class 73/0 Only)
MW – Low Level (Buffer Beam) Multiple Working Connectors
ETH – Electric Train Heat Cables & Receptacles
Also included are – Dummy Buckeye Couplers (2 raised and 2 in the dropped position)

This item is supplied UNPAINTED, the attached pictures can help with painting.

Notes:-

• Please refer to our Pipes & Cables Guide Document that is available to download from our main website.
• There may have been variations between members of the Class 73 fleet in pipe configurations, colours, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
• All pipes have a peg that can be fitted into a drilled hole in the buffer beam, alternatively the peg can be cut-off and the pipe attached with a small amount of adhesive.
• These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
• The pipes are supplied unpainted, please refer to pictures for typical colours.
• Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.

(SET Number 25 for Class 73 Electro-Diesel)