Detailed Pipes and Cables for a Class 58 Locomotive - OO Gauge (SET 9) Including Walkway Safety Barriers with Handrails

This set of brake pipes is enough for both ends of one Class 58 Locomotive,

Please read the full product description below.

the UNPAINTED pack includes:-

2 - Air Brake Pipes (BP) - Red
4 - Main Reservoir Air Pipes (MRP) - Yellow
4 - Regulating Control Air Pipes (CA) - White
2 - Multiple Working Jumper Cables (M/W) - Orange
2 - Multiple Working Jumper Receptacles (M/W) - Orange
2 - Dummy Screw Couplings (one of which is in the stored position)
4 - Walkway Safety Barriers with Handrails, note, two sizes of the walkway barriers are provided,
      - slightly reduced height suitable for Hornby models,
      - correct height suitable for either Heljan or EFE models.

Notes:-

• Please refer to the attached pipes and cables guide document.
• There may be variations between members of the Class 58 fleet in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
• All pipes & cables have a 0.7mm peg that can be fitted into a drilled hole in the buffer beam / cab front, alternatively the pegs can be cut-off and the parts attached with a small amount of adhesive.
• These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
• The pipes are supplied unpainted, please refer to pictures for typical colours.
• Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.

(SET Number 9 for Class 58)